laguna 14-Twelve Bandsaw, Руководство пользователя

Страница: 4 / 68

4
operation is dusty. Everyday eyeglasses only have impact-resistant lenses; they
are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold work when practical. It's safer
than using your hand, and it frees both hands to operate tool.
13. DON'T OVERREACH. Keep proper footing and balance at all times.
14. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing accessories.
15. DISCONNECT TOOLS before servicing, when changing accessories such as
blades, bits and cutters.
16. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in
off position before plugging in.
17. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for
recommended accessories. The use of improper accessories may cause risk of
injury to persons.
18. NEVER STAND ON TOOL Serious injury could occur if the tool is tipped or if the
cutting tool is unintentionally contacted.
19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function
–
check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and any other conditions
that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced.
20. DIRECTION OF FEED. Feed work into a blade or cutter against the direction of
rotation of the blade or cutter only.
21. NEVER LEAVE TOOL RUNNING UNATTENDED TURN POWER OFF. Don't
leave tool until it comes to a complete stop.
Table A
Amperage Rating Volts Total length of cord in feet
120 25 50 100 150
240 50 100 200 300
More Than Not More Than Minimum gauge for cord
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
11. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting