Laguna Tools REVO 24-36, Оригинальное руководство пользователя

Страница: 23 / 60

22
Assembly and setup.
The machine comes mostly assembled. You will have to assemble the legs, headstock,
tailstock, tool storage and the tool rest to the bed of the machine.
Note . It is recommended that the head stock, tool rest and tailstock be removed from the bed
of the lathe to ease assembly (Covered later in the manual).
Assembling the legs to the bed of the lathe.
There is a stop at both ends of the bed. The stop is a safety feature that makes
it impossible for the headstock or tailstock to slide off the end of the bed.
Remove the stops and loosen the clamps on both the head stock, tool rest and tailstock.
Slide them off the bed. This will greatly reduce the weight of the bed and allow easier
assembly.
Note: The headstock and tailstock are very heavy and extreme caution must be exercised
when removing them from the bed of the lathe. Take care not to cause damage during
removal.
Stop
Tailstock clamp handle
Bed with headstock and tailstock
removed
Leg fixing screws Bed Leg