Laguna Tools PX-20 SHEARTEC II, Руководство пользователя

Страница: 42 / 76

42
Shear-Tec II Knife Rotation/Replacement-
The knife inserts on the Planer are four-sided. When dull, remove each knife, rotate it 90° for a
fresh edge, and re-install it. No further adjustment is necessary.
Use a Torx wrench (T25) to
remove the knife insert screw. Use a second Torx wrench to hold the cutterhead (from rotating) in
position (in another screw). DO NOT USE YOUR HAND TO HOLD THE CUTTERHEAD!
(See Figure to the Right.).
CAUTION!- KNIFE INSERTS ARE DANGEROUSLY SHARP. USE EXTREME CAUTION WHEN
INSPECTING, REMOVING, OR REPLACING KNIFE INSERTS.
WARNING!-
•
TURN PLANER OFF AND DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE
OR ADJUSTMENTS!
•
MAKE SURE ALL KNIFE INSERT SCREWS ARE TIGHTENED SECURELY. LOOSE INSERTS CAN BE
PROPELLED AT HIGH SPEED FROM A ROTATING CUTTERHEAD, CAUSING INJURY.
TORQUE EACH SCREW TO 52-60 IN/LBS or 231-267 Newtons.
•
KNIVES ARE EXTREMELY SHARP. BE VERY CAREFUL WHEN HANDLING KNIVES. FAILURE TO
COMPLY MAY CAUSE SERIOUS INJURY.