8
Note:
The base of the machine can be assembled with the doors either at the
back or front of the machine, to suit your installation. The machine above is
shown with the cabinet doors at the front of the machine.
Base/cabinet
The cabinet comes unassembled and can be used for storage.
Main table
The main table is made from cast iron and has a miter T slot running along the
length. The slot is used to clamp the fence and also the miter gauge.
Side table
The side table is made from cast iron and is vertically adjustable.
Belt release handle
The belt release handle removes the tension from the sanding belt to allow
removal.
Miter gauge Fence Belt release handle Sanding belt Dust chute Motor
Angle clamp handle
Vertical adjustment handle Base / cabinet On / off switch End table
Power cable
