Laguna Tools MTST5S-0135, Руководство по эксплуатации

Страница: 27 / 59

4. OPERATION
25
4-4. MITER GAUGE CUTTING
Note: Always wear safety glasses, a respirator, and hearing protection and NO smoking
when operating
this machine.
1. The miter gauge allows miter to do oblique cuts from + 45˚ to - 45˚.
2. Slide the miter gauge onto the table groove (Fig. 4-4.1).
3. Position the gauge at the desired angle and clamp handle to lock the fence in
place.
4. Position the blade guard to the correct height for your work piece
5. Load the work piece onto the table saw.
6. Take all the necessary safety precautions, and then perform the cutting operation.
Figure 4-4.1