Laguna Tools MLC122040, Руководство пользователя, Страница: 28 / 40

PL1220 Laser, MLC122040
Adjustments & Maintenance Work
28
© 03/2018, Laguna Tools, Inc.
5.8 Leveling the machine
Figure 6-1: Leveling the PL1220
Leveling Feet
Leveling Procedure
1.
With the Laser machine on the table, use a level to measure
if the pl1220 is not level.
2. Adjust one of the four leveling casters located at the bottom
of the machine, as needed, to level it.
TECH TIP: It is only important to level the machine with the work
surface if operating the machine with the bottom removed (workpiece
on the work surface). When cutting in this setting, make sure the
work surface is level prior to leveling the machine to the work
surface.
TECH TIP: When installing a new tube or performing a mirror
alignment, note that it is not important that the machine is level to
that table. However, it is important that the laser tube is level with the
machine chassis.
A
A