Laguna Tools MLC122040, Руководство пользователя, Страница: 10 / 40

PL1220 Laser, MLC122040
Machine Maps
10
© 03/2018, Laguna Tools, Inc.
2.3 Internal Map
KEY
A.
Laser Tube
B. Laser Tube Mount
C. Beam Mirror
D. Y-Axis Motor
E. X-Axis Motor
F. Y-Axis Motor Driver
G. X-Axis Motor Driver
H. 24 V Power Supply
I. Controller Computer
J. Work Area
K. Gantry
L. Laser Head
M. Connection Input Panel
N. Laser Power Supply
O. Chassis
Also See:
Connection Diagram
Appendix 6: Exploded Parts
DESCRIPTION AND PURPOSE
1. Laser Tube – Used in conjunction with the laser power supply to
emit a laser beam.
2. Laser Tube Mount – Mounts the laser tube and is adjustable to
align the laser and the beam mirrors.
3. Beam Mirror – Used to change the direction of the beam. There
are three mirrors in total to direct the laser beam to the work
piece.
4. Y-Axis Motor – Drives the gantry along the linear rails to control
the laser beam coordinates on the workpiece.
5. X-Axis Motor – Drives the gantry along the linear rails to control
the laser beam coordinates on the workpiece.
6. Y-Axis Motor Driver – Uses user input parameters to control
the rotation direction and speed of the Y-axis motor.
7. X-Axis Motor Driver – Uses user input parameters to control
the rotation direction and speed of the X-axis motor.
8. 24 V Power Supply – Converts AC input power to 24V DC
power to run the electrical components of the laser. The beam
has a separate power supply (N).
9. Controller Computer – Converts user input parameters to
mechanical output. The computer unit controls the motor drives
and laser output.
10. Work Area – The area in which the laser head can travel.
11. Gantry – Allows the laser head to be translated to any position
in the work area.
12. Laser Head – Consists of a mirror to direct the beam to the
work piece, a focal lens to concentrate the laser beam, and
a casing to adjust the position of the focal lens and enclose the
beam. The laser head also mounts the red dot indicator as well
as the air inlet tube. The user can adjust the mirror position, red
dot location, and air inlet direction. The recommended focal
lens is documented on the specifications sheet.
13. Connection Input Panel – Mounts all connections needed to
operate the machine. See External Machine map for description
of connections.
14. Laser Power Supply – Converts 110V/220V (50/60Hz) AC
input power to 20,000V DC power to produce a laser beam.
C
A
B
C
D
E
I
J
K
L
K J L
H
I
M
O
N
G
F H