17
4. Combination (Compression) Router Bits
These bits combine the advantages of both up shear and down shear designs.
The top section of the tool is down shear to prevent chipping the top surface of
the material, and the lower part of the bit is up shear to prevent chipping the
bottom surface of the material.
Combination Router Bits are the preferred configuration for machining veneered
plywood as well as melamine surfaced product. A variation of the bit is called the
“Mortising Compression” router bit. With this bit, the up shear portion of the bit is
less than ¼” in length so that the bit can be used on ¼” veneered plywood and
for dados.
5. Form Router Bits
Form Router Bits typically are available in standard profiles such as round over,
ogee, etc. Router bits that have a shape associated with them would be
classified with this group
Controller Button Functions
Note: Controller may vary from that shown.
X+ / 1
= Moves the gantry in the X direction
away from the home end of the bed.
Y+ / 2
= Moves the gantry in the Y direction
away from the home end of the bed.
Z+ / 3
= Moves the router head in the Z (Up
direction) away from the table surface.
XY-0 / 4
= Sets
machine “Origin”
.
X- / 5
= Moves the gantry in the X direction
toward the home end of the bed.
Y- / 6
= Moves the router head in the Y direction
toward the home end of the bed.
Z- / 7
= Moves the router head in the Z (Down
direction) toward the table surface.
Z-0 / 8
=
Used set the tool to the “Zero” surface
(tool “tou
ch-
o ”).
HOME / 9
= Causes the machine to move to the
“Home” position, first in the Z axis, followed by X and then Y. (Home is a
mechanically determined position using mechanical switches/sensors.)
HIGH/LOW / 0
= Toggles jogging speeds between High and Low ranges.
ONOFF/.
= Turns the Router Spindle On and Off.
MENU / _
= Provides access to various setup features.
ORIGIN /OK
=
Use to accept commands (“On”). Origin causes machine to the
machine‘s “Origin”.
Controller may vary
from that shown.
Содержание MCNC Swift 48 X 96-0233
Страница 2: ......
