Laguna Tools L A175017, Руководство пользователя

Страница: 22 / 28

22
Motor overheats.
The motor is designed to run hot, but should it overheat it has an internal thermal overload
protector that will shut it down until the motor has cooled, and then it will reset automatically.
If the motor overheats, wait until it has cooled and restart. If the motor shuts down
consistently check for the reason. Typical reasons are dull cutting tools, motor cooling fan
clogged or faulty, motor cooling fins clogged, over feeding the job, and excessive ambient
temperature.
Squeaking noise.
1. Check the bearings.
2. Check the drive belt.
Spindle slows down during a cut.
1. Dull cutting tools. Replace the tool or have it re-sharpened.
2. Feeding the wood too fast. Slow down the feed rate.
3. Oil or dirt on the drive belt. Clean or replace the drive belt.
Machine vibrates.
1. Machine not level on the floor. Re-level the machine ensuring that it has no movement.
2. Damaged drive belt. Replace the belt.
3. Job is not balanced. Change to slower speed and or balance the job
4. Damaged pulley. Replace the pulley.