Laguna Tools L A175017, Руководство пользователя

Страница: 13 / 28

13
Assembly and setup.
The machine comes mostly assembled. You will have to assemble only the legs and the tool
rest to the bed of the machine.
Note . It is recommended that the head stock is removed from the bed of the lathe to ease
assembly [Covered later in the manual].
Assembling the legs to the bed of the machine.
Head stock removal.
Remove the nut that secures the head stock. Lift the head
stock off the bed. This will reduce the weight of the bed and
make assembly easier.
Lift the legs to the vertical position and lower the bed onto
them. Secure with the fixing screws provided.
Note. Each leg must be supported to ensure that it will not
fall when positioning the bed.
Note. To ensure safety you will need 4 people to assemble
the bed to the legs. One on each leg, and one at
each end of the bed.
Note. If you have any doubt about the described procedure, seek professional
assistance. Do not attempt any procedure that you feel is unsafe, or that you do not
have the physical capability of achieving.
Head stock clamp nut
Lathe bed on wooden blocks with the head
stock removed
Legs fitted to the lathe bed [no
adjusting feet fitted]