Part# VDL-18
20
REV#082020
.
Trunion clamp stud
Tilt stop bolt
It is possible to fit the table to the bandsaw with one person but far easier if you have two people, one to lift
the table and one to guide the trunion clamp studs
Tilt blanking disc
Table tilt hole
Tilt stop bolt
Tilt blanking disc
The table has a reference stop bolt that is used to quickly align the table after tilting.
The stop bolt hits the tilt-blanking disc when it is positioned over the table tilt hole.
When the tilt blanking disc is moved away from the hole, it allows the tilt stop bolt to
pass through the table tilt hole, and the table can be moved to the maximum amount
of tilt (-6 degrees).
Fitting the table.
Содержание Dake VDL-18
