Laguna Tools CL1200, Руководство пользователя

Страница: 17 / 45

Fitting the indexing mechanism
1.
Fit the indexing pin
assembly at the back of the
lathe with the screws
provided.
2. Lock the spindle with the
spindle-locking rod [directly
below the spindle thread].
3. The index plate has a split
thread that is adjusted with
a clamp screw.
4. Loosen the clamp screw and
attach the index plate to the
spindle thread.
5. Adjust the position of the
index plate on the thread so
that the holes on the side
line up with the locking pin.
6. Once in the final position;
lock in position by
tightening the clamp screw.
7. To remove the indexing plate reverse the above procedure, but leave the
indexing pin assembly in position.
Note: Before starting the router, double-check that the thread clamping screw is
tight.
Indexing plate
Fitting the router holder
The router holder is mounted on the saddle cross slide and accepts laminate cutters
with a collar of 1.7” diameter.
17