Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
Part# 972016-2
9
REV#082020
Machine Procedures
Loading and Unloading Machine:
WARNING!
-
Be sure the maximum capacity of each strap is greater than the total
weight of the press.
-
Do not make sudden movements when transporting the machine.
-
The manufacturer is not responsible for damage to the machine while loading or unloading the
press.
Filling Oil Pump Reservoir:
-
Required Oil is DTE 24 Hydraulic Oil.
-
To fill the pumping unit, use exclusively the oils indicated in the table on the next page or
equivalent. The environmental conditions must be considered before purchasing oil. To
transfer the oil from the container to the tank use an external filter as shown in Figure 2
preventing the introduction of foreign material or liquids at the time of filling.
-
OIL CAPACITY IS 22.5 US GALLONS.
Figure 2
Pick up
here
Pick up
here