Mounting and operating instructions Electric transporter BLACK LINE
41/54
Servicing
9
SERVICING
9.1
Important safety instructions
The work described in this chapter may only be carried out after reading chapter 2 "Safety" on
page 9 as well as the safety instructions and warnings for this chapter.
Chapter 2 "Safety" on page 9 provides general safety information for the entire product, details
of the safety-related equipment of the product, the required qualifications of personnel, and
warnings, which concern the entire procuct.
The safety instructions in this chapter supplement the general safety information and apply only
to this chapter.
The warning notices in this chapter supplement the general safety information and apply only to
this chapter.
WARNING!
Non-authorised staff
Only the work described in these instructions with regards to the maintenance may be carried
out by the staff of the operator.
This staff has to be trained and authorised for the intended tasks.
All further work and repairs may as a rule only be carried out by FIBRO staff.
If using non-authorised staff, wrong action may cause injuries.
WARNING!
Use of incorrect spare parts
If incorrect spare parts or operational media are used, consequential damage can occur.
Only use spare parts that are cited in our spare parts list or spare parts that we have ap-
proved.
Individual components must not be used to replace one another. Subsequent modifications
are not permitted.
Only specified process materials must be used.
Self-locking screws and nuts must be continually replaced.
All specified screw tightening torques must be strictly observed.
Failure to comply with these instructions means that the possibility of injury cannot be ex-
cluded.
9.2
Maintenance work
The following activities are considered maintenance work:
•
Inspection
•
Cleaning
•
Maintenance
•
Repair
