LAEGENDARY THUNDER, Руководство пользователя

Страница: 12 / 59

12
www.LAEGENDARY.com
Radio System
1. Open the battery compartment cover.
2. Insert 4 AA fully charged batteries with correct polarities (batteries are not included.)
3. Slide back the battery cover.
Remote Control Battery Installation:
The remote control is pre-binded. In case you need to rebind it, follow the below steps:
1. Turn off the transmitter.
2. Press and hold the bind button on the transmitter and turn it on. There will be a
flashing green light on the transmitter and a slow flashing light on the receiver.
3. Turn off the transmitter and the RC car and restart.
4. If it still does not work, repeat the process.
Binding Process:
1. On the remote’s TH.TRIM or ST.TRIM button, press the - or + all the way to the lowest or
highest settings until the green light stops flashing.
2. Press the opposite button around 30 times or until you see the green light flashes
twice. It means that you have entered the neutral or middle position. (If you press - on
step 1, press + on step 2 and vice versa)
3. Once you find the neutral position, the throttle or steering function should work
properly.
Resetting the Remote’s Throttle Trim (TH.TRIM) and Steering Trim (ST.TRIM) Function
to Neutral Position
The system includes a remote control (transmitter), a receiver and an electronic speed
control.
4CH 2.4GHz RADIO SYSTEM