Lacunza IV-800, Инструкция

Страница: 7 / 28

INSTRUCTIONS FOR THE INSTALLER 6
2.
2.2.2. Location of the appliance in the
room
Choose a location in the room which
favours good hot-air distribution by
convection and radiation.
The interior of the apparatus
incorporates two handles which facilitate
its transferral to its final location. Hold the
apparatus on both sides, as displayed in
the image:
Figure No.3 - Positioning the handles for
transferral
2.3. Installation of the appliance
2.3.1. Floor
Make sure that the base can withstand
the total constructed weight of the
appliance and its casing.
The apparatus should not be placed on
combustible material.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials . Looking at the appliance head-
on:
Distance to
combustible
materials
(mm)
From the right-hand side 400
From the left-hand side 400
From the rear 400
From the front 1000
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating
if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
•
Make sure that the glass/es is/are
not broken or damaged.
•
Make sure that the flueway is not
obstructed with packing or loose parts.
•
Check the deflectors are correctly
positioned.
•
Make sure that the airtight joints
on the flue circuit are in perfect
condition.
•
Make sure that the doors close
properly.
•
Make sure that all moving parts are
fitted in place.
2.3.4. Height adjustment and levelling the
appliance
The apparatus incorporates 4 adjustable
legs for its levelling and height adjustment
with a 24 mm wrench.
Figure No.4 - Close up of the 24 mm
wrench for adjusting the legs
If a fitting height of below 535 mm is
required, the 4 legs can be removed by
unscrewing them completely.