Lacunza IV-800, Инструкция

Страница: 11 / 28

INSTRUCTIONS FOR THE INSTALLER 10
2.
3. Screw the nozzle in 3 points with the
sheet screws and washers provided
Figure No.8 - Correctly screwed nozzle at
the 3 points with the washers
2.3.8. Exterior Frame. Assembly
For clients that are interested, Lacunza
has a 4 external sided frame for the IF-800
and IV-800 apparatus.
There are various possibilities when it
comes to positioning the frame, depending
on the fitter’s preferences:
Screws
6 black screws are provided with the
frame which can be used to attach it to the
apparatus. This should be done as follows:
•
Loosen (without removing) the two
screws on the upper support of the
door with a 10 mm wrench. By lifting
this piece up, the door can be removed
to provide comfortable access to the
fastening points of the frame.
Figure No.9 - Loosening the door support
with a 10 mm wrench
•
Fasten the 6 screws provided using
an L-shaped Torx T20 wrench.
Figure No.10 - Screw fastening points
Bending the tabs
The 6 frame tabs can be bent using a
flat-bladed screwdriver and the frame can
be attached without needing to remove
the door or to screw anything on.
Figure No.11 - Position of the 6 tabs to
bend
Figure No.12 - How to bend the tabs