26
PROBLEMS SOLUTIONS
Problem
The ice maker does not work
The insufficient water indica-
tor is on
The compressor does not
work
The compressor works but
no ice is being made
The ice does not drop easily
Problems with the indicator
lights
1.- Inadequate power supply
range
2.- The room temperature is
below 10ºC
1- There is not enough water
in the water supply system
2.- Damaged water input
valve
3.- The tap water pressure is
too low
1.- Insufficient water
2.- The ice container is full
1.- Coolant leaks
2.- The cooling system is
blocked
1.- The water temperature or
the room temperature is too
low.
2.- The valve is damaged
The water container is not
inclined
1.- Stop the machine and
restart it. Check the voltage
2.- Try again once the room
temperature is above 10ºC
1- Check the water supply. If it
is correct, restart the machine
2.- Check the water input
valve
3.- Make sure that the tap
water pressure is greater than
1 kg/cm2
1.- Check the water supply
system
2.- Remove some of the ice
1.- Recharge with additional coolant and check the
output again
2.- Charge with N2 to check the system for block-
ages and replace the filter
3.- Replace the valve
4.- Make sure that the fan is working
1.- Check whether the room tem-
perature (10ºC) and the water
temperature (7ºC) are too low
2.- Replace the valve
Disconnect the power sup-
ply and make sure that the
motor is not inclined. Allow
for 3-4 minutes to pass and
restart the machine
Possible Cause
Solution
