31
PARTS LIST
OPERATION
1.- Place the sharpener on a solid, stable surface and make sure that you are in a comfortable
position during the sharpening operation in order to avoid unnecessary risks.
2.- Connect the plug at the power base.
3.- After starting the sharpener, the head will begin to rotate.
4.- For the knife sharpener, use the grooves located to the left labelled COARSE, slide the knife
from the handle to the point with slight pressure, alternating between the left and right
grooves to sharpen both sides of the knife and repeat this movement four times. For the
best result, repeat twice in the grooves labelled FINE on both sides of the knife.
If you still don't think it's correctly sharpened, repeat steps again.
5.- For the scissors sharpener, only use the groove that is located to the right of the head
labelled SCISSORS, and file both sides of the scissors.
6.- To repair flathead screwdrivers, use the groove labelled SCREWDRIVERS, you'll be able to
get rid of deformations in the screwdriver's tip.
Put the screwdriver in the groove to the right of FINE to file the sides of your flathead
screwdriver.
1.- Thick sharpener
2.- Fine sharpener
3.- Screwdriver sharpener
4.- Scissors sharpener
5.- Fixing suction cups
6.- ON/OFF switch
2
3
4
5
6
1