Lacon L-EX73000, Быстрый старт

Страница: 3 / 184

Hardened Managed Ethernet Switch
User’s Manual 3
Functional Description
z Meets NEMA TS1/TS2 Environmental requirements such as
temperature, shock, and vibration for traffic control equipment.
z Meets EN61000-6-2 & EN61000-6-3 EMC Generic Standard Immunity
for industrial environment.
z Manageable via SNMP, Web-based, Telnet, and RS-232 console port.
z Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation:
1000Mbps-full-duplex; 10/100Mbps-full/half-duplex; Auto MDI/MDIX.
z 100Base-FX: Multi mode SC or ST type; Single mode SC or ST type;
WDM Single mode SC type.
z 1000Base-SX/LX: Multi mode SC type, Single mode SC type, or WDM
Single mode SC type.
z
Supports 8192 MAC addresses. Provides 2M bits memory buffer.
z Store-and-forward mechanism.
z Full wire-speed forwarding rate.
z Alarms for power and port link failure by relay output.
z Power Supply: Redundant DC Terminal Block power inputs and
12VDC DC JACK with 100-240VAC external power supply. "For Use
with Model UP0351E-12P as power jack supply source by Universal
Micro Electronics Co., Ltd.".
z Field Wiring Terminal: Use Copper Conductors Only, 60/75
℃
, 14-24
AWG torque value 4.5 lb-in.
z Operating voltage and Max. current consumption: 1.25A @ 12VDC,
0.625A @ 24VDC, 0.313A @ 48VDC. Power consumption: 15W Max.
z -40
℃
to 75
℃
(-40
℉
to 167
℉
) operating temperature range. Tested for
functional operation @ -40
℃
to 85
℃
(-40
℉
to 185
℉
). UL508
Industrial Control Equipment certified Maximum Surrounding Air
Temperature @ 75
℃
(167
℉
).
z For use in Pollution Degree 2 Environment.
z Supports DIN-Rail and Panel Mounting installation.
z Suitable for use in Class I, Division 2, Groups A, B, C and D hazardous
locations, or nonhazardous locations only.
z WARNING – EXPLOSION HAZARD – Do not disconnect equipment
while the circuit is live or unless the area is known to be free of
ignitable concentrations.
z WARNING – EXPLOSION HAZARD – Substitution of any component
may impair suitability for Class I, Division 2.
z WARNING – Exposure to some chemicals may degrade the sealing
properties of materials used in the Sealed Relay Device.