Lacon L-EX73000, Быстрый старт

Страница: 156 / 184

Hardened Managed Ethernet Switch
156 User’s Manual
The following example specifies get community name (
name
) for SNMP:
switch_a(config)#snmp-server community get name
switch_a(config)#
Set Community Name:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use
snmp-server community set
command to specify and
no
snmp-server community set
command to remove get community name for
SNMP.
3. Command
Syntax:
snmp-server community set NAME
no snmp-server community set
NAME The set community name for SNMP.
4. Example:
The following example specifies set community name (
name
) for SNMP:
switch_a(config)#snmp-server community set name
switch_a(config)#
SNMP v3
SNMPv3 No-Auth:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode and
without authentication. Use the no form of the command to delete this user.
3. Command
Syntax:
(no) snmp-server v3-user USERNAME (ro
｜
rw) noauth
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
4. Example:
The following example adds a user (
myuser
) using snmp v3 with read-only
access mode and without authentication: