Lacon L-EX73000, Быстрый старт

Страница: 109 / 184

Hardened Managed Ethernet Switch
User’s Manual 109
IP Address
IP Address/IP Subnet Mask:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2. Usage:
Use
ip address
command to set the IP address of an interface.
Use the
no ip address
command to remove the IP address from an
interface.
3. Command
Syntax:
ip address IP-ADDRESS
no ip address IP-ADDRESS
no ip address
IP-ADDRESS A.B.C.D/M specifies the IP address and prefix length of an
interface.
M specifies IP subnet mask, 8: 255.0.0.0, 16:255.255.0.0, 24:
255.255.255.0.
4. Example:
The following example sets the new IP address
192.168.1.10
and new IP
subnet mask
255.255.255.0
to switch:
switch_a(config)#interface vlan1.1
switch_a(config-if)#ip address 192.168.1.10/24
switch_a(config-if)#
Default Gateway:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use
ip default-gateway
command to set the IP address of the default
gateway.
Use the
no ip default-gateway
command to remove the IP address of the
default gateway.
3. Command
Syntax:
ip default-gateway IP-ADDRESS
no ip default-gateway
IP-ADDRESS A.B.C.D specifies the IP address of the default gateway.