8
1
3
2
Return signal LED - B
1
2
Pilot lamp - A
1
3
2
V
out
1 500 V
³
V
out
2 000 V
³
V
out
2 500 V
³
V
out
3 000 V
³
V
out
4 000 V
³
V
out
5 000 V
³
V
out
6 000 V
³
V
out
7 000 V
³
Bar-graph operation indicator of the fence.
Each LED indicates a level of the output voltage (Vout) of the energizer.
Led alarm :
V
out
<
1 500 V
very little vegetation
average vegetation
V
output
oltage
Display
Voltage reading
by each Sentinel responder
when installed.
thick vegetation
= Green backlight when all is well.
= Backlight flashing red when the voltage is no longer sufficient to guard, or if a fault is found by the sentinels. In this case
the element is in error at the flashing display.
The
Clos
2006-D
to indicate the voltage at the point where it is installed.
can be associated with sentinel responders (1 to 4) for increased guard security The responder is used
Specific instructions for sentinel responders comes with them.
Connexion example with a sentinel responder :
Terminal 1 :
to be connected to the
EARTH
connexion.
Terminal 2 : to be connected to the fence as
“TOTAL POWER OUTPUT”
.
Terminal 1 :
to be connected to the
EARTH
connexion
.
Terminal 2 : to be connected to the fence as
“TOTAL POWER OUTPUT”
.
Terminal 3 : as an option, to be connected to the fence as
“REDUCED POWER
OUTPUT”
as well as the
return signal test
.
Pilot lamp - A
Clos 2000-6 D
Clos 2000-1 / Clos 2000-2 / Clos 2000-3 / Clos 2000-4 / Clos 2000-6
Clos 2000-4 Led /Clos 2000-6 Led/ Clos 2000-6 D
Clos 2000-4 Led /Clos 2000-6 Led/ Clos 2000-6 D