English
English
Checking water level in the basin
Periodically empty the tray of water.
Checking water level in the boiler
The machine is fitted with a series of automatic level control devices
to keep the water in the boiler at a pre-set level.
The indicator light (
11
) comes on when water enters the boiler.
16
8
Checking water level in reservoir
When the yellow indicator light (
8
) lights up, fill the reservoir up to the
maximum level.
If this operation is delayed, the safety device is activated and the
coffee preparation procedure suspended.
Other hot beverage
Steam dispensing
Plunge the steam jet pipe (
3
) into the liquid to be heated in a suitable
container and turn the steam adjustment knob (
4
).
When the liquid is hot, stop the flow of steam by turning knob (
4
) the
other way (towards 0).
Heating milk for frothy coffee (cappuccino)
Use a tall narrow jug and fill it up to about the half-way mark. Then
plunge the steam jet pipe (
3
) into the milk.
Gradually open up the steam tap (
4
) and heat the milk for a few
seconds.
When the required amount of froth has been made and the tempera-
ture is sufficiently high, stop the flow of steam by turning knob (
4
)
the other way (towards 0).
When the steam jet pipe (
3
) is no longer required, clean it thoroughly
with a sponge and a clean cloth.
Dispensing hot water
Position a container under the hot water pipe (
5
) and turn the hot
water dispensing knob (
14
).
When the required amount has been dispensed, stop the flow of hot
waterby turning knob (
14
) the other way (towards 0).
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
4
3
5
14
