Getting Connected
User Manual
page 11
2.4. Configuring the Intelligent
Surface
This unique product features an intelligent surface that can be con-
figured to trigger an action when it is touched. This action is set
using the LaCie Desktop Manager software. To establish an action,
first make sure you have connected the drive and have run the LaCie
Setup Assistant as described in sections
2.1
,
2.2
, and
2.3
, then fol-
low these steps:
1. Install the LaCie Desktop Manager by double-clicking the drive
icon in My Computer/Computer (Windows) or on the Desktop
(Mac), opening the
Software
folder, then launching the installer
located in the folder for your operating system.
TECHNICAL NOTE:
If you have manually formatted the drive us-
ing your operating system’s disk utility instead of or after running the
LaCie Setup Assistant, you will need to download the LaCie Desktop
Manager from the LaCie website.
2. When setup has completed, launch the LaCie Desktop Manager
from the Start Menu (Windows) or the Applications folder (Mac).
3. When the LaCie Desktop Manager opens, select the Starck hard
drive in the left-hand column (#3,
Fig. 07
).
4. Click the
Shortcut Button
icon (#4,
Fig. 07
).
5. In the main column, set an action for a
Button Click
and a
But-
ton Long Click
(
Fig. 08
). Test the action if you wish, then close
the LaCie Desktop Manager.
NOTE:
The Starck hard drive cannot be encrypted using the LaCie
Desktop Manager application.
NOTE:
For more information on using this software, refer to the
LaCie Desktop Manager User Manual.
Fig. 06
Fig. 07
Fig. 08
(...)
