LaCie Little Disk
• Design by Sam Hecht
User Manual
page 0
Getting Connected
LaCie
F
2.1. Connecting the USB 2.0 Interface Cable
Fig. 2.1.A
Fig. 2.1.B
IMpOrTANT INfO:
If your Little Disk Por-
table Hard Drive does not power on within a few
seconds of connecting the USB interface cable,
proceed to section
2.3, Connecting the Optional
Power Sharing Cable
.
Remove the cap.
Pull out the integrated USB 2.0 cable until it stops
(Fig. 2.1.A). The cord is about 2 inches long; do not
attempt to pull it out farther.
Insert the USB 2.0 connector into an available USB
2.0 port on your computer (Fig. 2.1.B). If you need
extra cable length, connect the integrated USB 2.0
cable to the USB extension cable and then connect
the extension cable to your computer.
After a few seconds, the hard drive will mount on
your computer and appear on the desktop (Mac us-
ers) or in My Computer (Windows users).
Proceed to section
3, Formatting and Partitioning
.
1.
2.
3.
4.
5.
DESIGN SAM HECHT
LaCie
Little Disk Portable
Hard Drive
Little Disk Pocket
Hard Drive
