LACAVA
4
Installation Instructions/Instrucciones de Instalación
1.
a) Prepare the wall and install PVC piping
to fit the location. Total wall thickness allowance
is 2 1/4”, escutcheon size is 2 3/8” diameter.
b) Secure well with screws the spout supporting
bracket to wall framing or plywood.
c) Carefully feed the water and power lines
attached to the spout through the brass spout
feed and PVC housing in the wall.
d) Slide the spout onto the spout brass feed snug
against the finished wall and tighten the set
screw on the bottom of the spout with provided
allen wrench.
e) Slide the escutcheon all the way flat against
the finished wall. Seal perimeter with silicone
if desired.
Note: Please use care not to tear or pinch power
or water lines while feeding them into the PVC
housing pipes and fitting the spout snug against
the wall.
2. Remove the 4 phillips screws holding the cover on
the control box and remove the cover (a).
3. Unplug the battery box, uncrew the top, and install
four AA batteries (b).
4. Close the battery box (c), plug it in and re-install in
the control box cover.
Ceramic Wall
Escutcheon
Faucet spout
Countertop
Nozzle tool
0 - 2 1/4”
0-55
2 3/8”
60
Water and power supply lines
Set screw
Spout brass feed
a
b
c
Warnings:
-Do not install the fixture facing a mirror-like surfaces
or other electronic systems operated by an infra-red
sensor
-Space for installation so that the user hands should
not interfere with the sensor detection area while
operating a nearby faucet or other objects
-The control box must be accessible after installation
- Keep minimum 10” distance between sink surface
and sensor
Min 10”
255
