Page 28 of 40
U
se
:
Turn gas supply on.
Rotate burner valve handle to lighting position “
IGN
”.
Turn burner valve handle to high position for maximum flame.
Rotate burner valve handle to off position.
A reduced flowrate position identified by the “
LOW
” mark produces the
preset minimum burner power.
U
seful hint :
Always choose a burner that matches the diameter of the utensil used.
C
leaning :
The burners are made in two parts in order to facilitate cleaning. Clean them separately.
After removing the pan supports and burners, the cooking surface can be cleaned easily and thoroughly by simply using a
sponge.
Do not use scouring pads or abrasive products such as oven cleaners and stain removers.
When cleaning, be careful not to splash liquid into the openings of the burners.
CLOSE THE MAINS GAS VALVE
BEFORE CLEANING
TOP BURNER
LOW
HIGH
OFF
IGN
CAUTION
:
During use of the cooking surface or
oven, accessible parts may become
very hot during use. Warn users of
the potential hazards.
