Page 30 of 40
U
se :
Before using your heating plate for the first time, it is advisable to pre-heat the heating plate with the burner
set to the low flame position. When the plate is sufficiently hot, turn off the burner and then grease the plate by
using a cloth soaked in vegetable oil (e.g. ground-nut oil). Once this operation has been performed 3 or 4 times the
cast iron will be protected against oxidation.
Turn gas supply on.
Rotate burner valve handle to lighting position “
IGN
”.
Turn burner valve handle to high position for maximum flame.
Rotate burner valve handle to “
OFF
” position.
A reduced flowrate position identified by the “
LOW
” mark produces the
preset minimum burner power.
C
leaning the heating plate :
Immediately remove any spillages to make cleaning easier. You can use commercially available special products for
cleaning cast iron.
If the cast iron is heavily soiled, use scouring pads and grease after cleaning.
TOP BURNER
LOW
HIGH
OFF
IGN
DO NOT USE WATER TO CLEAN THE HEATING
PLATE WHEN IT IS HOT.
This can damage it.
