Page 10 of 21– US –
Oven Orifice:
To replace oven orifice:
Remove oven baseplate.
CAUTION:
when refitting place the
base underneath the groove on the fascia (Figures 16 and 17).
Remove screws
L
(Figure 18). Remove the screen below the
oven (Figure 19). Loosen screw
M
then slide open the burner air
collar towards the front of the oven (Figure 20). Replace the
orifice (Table
5
).
Pilot burner orifice:
Change the pilot burner orifice:
Remove slotted cap at bottom of pilot burner assembly. Unscrew
pilot injector. Replace new injector (Table
5
), screw in completely until injector bottoms out. Replace cap screw.
Gas pilot
LP
: 65.103032
Gas pilot
NG
: 65.103031
Adjustment of oven primary airflow:
Remove the base, unscrew the screw
M
holding the burner (Fig.20).
Adjust the air ring (Table 6, Figure 21).
Table 6
Opening in mm / inches
GAS
Pressure
Oven
Natural Gas
6" WC
4 /
3
/
16
L.P. propane
10" WC
6 /
1
/
4
Adjusting pilot burner air supply
Turn ring
N
to fully open for Butane/Propane, to half open for natural gas (Fig. 23)
Table 5
Ø
GAS
Pressure
Gas oven
Pilot burner
Natural gas
6" WC
1.40
0.45
L.P. propane
10" WC
0.95
0.25
Fig. 21
Air Adjustment
Fig. 23
N
Fig. 20
M
Fig. 22
