SECTION
4. INSTALLATION
Your Lacanche BFUS900 extraction hood is designed to be fitted into kitchen furniture, over mantles, or a chimney and is
vented from the top. When installing the extractor care should be taken on the position that the extractor is installed. The
extractor should be installed as far forward as possible over the Lacanche range. If the extractor is installed towards the rear
of the range the burners at the front of the range will not be covered by extractor and smoke spillage could occur.
The hood is mounted into the kitchen furniture or over mantle using a base board (not supplied by FdeF Ltd) and should be a
minimum of 18mm thick; the base board is fixed to the kitchen furniture or over mantle. Ensure that the base board and
kitchen furniture are of secure construction to take the weight of the extractor. A hole has to be cut into the base board to
accommodate the extractor, the dimensions are as follows:
Cut-out
Dimension
LENGHT MM
DEPTH MM
BFUS900
826
265
