6. Application Example
54
All:
All selected wells are defined as replicates. If an existing ID number for the
samples and standards is chosen, the selected wells are then added as
replicates to the existing replicates. With all other identifier types the selected
wells are added as replicates to the existing replicates.
Two arrow buttons
define the direction of the replicate and ID number
sequence (horizontal or vertical).
In this example select
Fix Number
and
2
.
In the
ID-Number
box and in the
Replicates
group box select the
vertical
arrows
.
Then select the wells D1 to G2 and click
Fill selection
.
Note
Select the wells as follows: Starting at well D1 click and drag the mouse
over the required wells to H1. Then hold down the control (Ctrl) key and
drag the mouse over the required wells from A2 to G2.
The
Plate Layout
appears as follows:
Click
Select all unused
from the toolbar to select all empty wells on the plate.
Then hold down the control (Ctrl) key and click the well
H12
, so
that it remains
blank and unmarked.
In the
Well Assignment
dialog box select
SM (Sample)
under
Identifiers
.
In the
Experimental
group box the number
1
remains.
In the
Replicates
group box choose
Fix number
and
2
.
In the
ID-Number
box leave 1 and in the
Replicates
group box select the
vertical arrows
. Click then
Fill selection
. The layout definition
procedure is
complete.
