Labrie Top Select, Руководство оператора

Страница: 52 / 112

Part #: 90405 43
C
LEANLINESS
Cleanliness is part of safety. Clean all the truck’s lights and
safety decals, so the operator, the surrounding pedestrians and
vehicles will be aware of the truck at all times. Rake dirt out of
the body once it has been unloaded. Some units are equipped
with clean out tools installed at front-of-body (optional).
See“End of the Day Cleaning” on page 96.
If the truck is equipped with cameras without lens protectors,
make sure that all lenses are clean.
L
OCKOUT
/T
AGOUT
P
ROCEDURE
This recommended lockout/tagout procedure should be
followed whenever you are inspecting, cleaning or repairing the
T
OP
S
ELECT
™.
To lockout and tagout a T
OP
S
ELECT
™ unit:
1. Apply the parking brake.
2. Switch OFF the hydraulic pump.
3. Move any of the hydraulic or pneumatic controls to relieve
any residual pressure in the system.
4. Shut off the engine, remove keys from ignition and store
keys in a safe controlled area (preferably on your person).
5. Turn off and lock the battery switch.
6. Chock all the wheels.
Note:If the T
OP
S
ELECT
™ is equipped with a master switch
on the battery set, you must turn it off.
7. Put an OFF SERVICE tag on the driver’s wheel.
8. Put an OFF SERVICE sign on the front windshield.
9. Use a safety prop to block any system that could move by
gravity (open tailgate, etc.).
10. Drain all air tanks.
CAUTION
F
AILURE TO FOLLOW THE LOCKOUT
/
TAGOUT PROCEDURE
MAY RESULT IN SERIOUS INJURY OR DEATH
.
?