Labrie Top Select, Руководство оператора

Страница: 51 / 112

42 Part #: 90405
C
AMERA
S
YSTEM
(
OPTIONAL
)
Optional monitor and cameras can be installed inside the cab
and throughout the vehicle. The T
OP
S
ELECT
™ can be equipped
with up to two (2) cameras.
The operator can choose between the camera on the tailgate,
the one located on street side mirror. The monitor controls each
of these cameras using a camera selector switch. However,
there is an automatic mode that switches to the tailgate camera
as soon as the transmission is put in reverse. When the
transmission is in reverse mode, the operator can not shift from
one camera to the other.
Since many types of monitors and cameras can be installed on
the vehicle, refer to the camera manufacturer manual provided
with the vehicle.
P
RIOR TO
S
TART
U
P
Before starting the vehicle, ensure that no system will engage
and begin to operate as you are starting the engine. All electrical
controls should be turned off and the hydraulic pump
disengaged.
The main valve on the hydraulic tank should be open.
Once the engine is started, wait until the air pressure is above
70 PSI; the audible alarm will stop as the air pressure reaches
70 PSI. You can then operate the equipment.
Main valve
(model may
vary)