Labrie Top Select, Руководство оператора

Страница: 16 / 112

Part #: 90405 7
S
AFETY
P
RECAUTIONS
1. Do not operate this vehicle before having read and
completely understood this manual and the safety labels
on the vehicle. Maintenance personnel must also read
and understand the
Maintenance Manual for this vehicle
(and the maintenance related information in this manual).
In case of any doubt, see your supervisor for clarification.
2. The T
OP
S
ELECT
™ units must be operated by only one
person.
3. At the beginning of every working day, inspect the body
and any system that might endanger the safety of the
public and/or the operator.
4. Do not operate this equipment if there are any signs of
damage or incomplete repairs.
5. Report any doubts and any equipment safety service
requirements to your supervisor.
6. Verify that the mirrors, brakes, accelerator pedal, steering
wheel and turn signals are in good working order.
7. For right-hand side operation during collection, the
maximum speed, if permitted, is 32 km/h (20 mph). Keep
both hands on the steering wheel at all times for better
control.
8. Do not leave the driving position until the vehicle is
completely stopped and the temporary handbrake (if
equipped) or the parking brake is applied.
9. When the vehicle is parked, the parking brake must be
applied.
10. For any work, cleaning or inspecting being done between
the body and the chassis or under the tailgate, the body
safety prop MUST be used. The vehicle must also be on
level ground.
11. Watch and be sure that there are no people at the rear of
the vehicle when opening and closing the tailgate(s) and/
or when raising the body.
12. Do not try to repair anything behind the Maximizer when it
is working or when the engine is still running. Personnel
authorized to get into the hopper MUST first complete the
lockout/tagout procedures required by the employer.
DANGER