Labrie Pendpac WITTKE RETRO FL, Руководство оператора

Страница: 34 / 98

24 Safety
Mechanical Safety Features
Body Safety Prop
The body safety prop is provided to support the body for maintenance purposes only. The prop will
only support an empty body
. Never support a loaded body with this prop.
Setting the Body Safety Prop
The body safety prop is designed to stabilize the body in a raised position in order to safely work
beneath the body. The body safety prop is standard equipment on full eject units with a service hoist,
and on tip to dump units.
N
OTE
:
The body safety prop must be engaged when accessing the underside of a raised body. Do not
use the body safety prop to support a loaded body!
1. Ensure that the vehicle is on solid, level ground and that the body is empty.
2. Set the chassis parking brake.
3. Check for overhead clearance.
4. Chock the front and rear tires.
5. Remove left and right body latch pins.
6. Unlatch the body safety prop spring pin latch.
7. Raise the body far enough to allow the body safety prop to hang vertically.
N
OTE
: Do not raise the body higher than is required to engage the body safety prop. If the unlatched
prop does not swing into a vertical plane when the body is raised, the prop has been damaged
and must be repaired prior to use.