Labrie Pendpac WITTKE RETRO FL, Руководство оператора

Страница: 35 / 98

Safety 25
8. Lower the body until the body safety prop landing pads fit into the retainer cutouts and seat
securely onto the chassis frame.
9. Complete the lockout/tagout procedure described elsewhere in this manual.
Tailgate Props
The tailgate props, one each side, when engaged, ensure that the tailgate cannot close.
Setting the Tailgate Props
N
OTE
: Never walk or work under the tailgate without first positioning the tailgate props!
To set the tailgate props:
1. Ensure that there is adequate clearance behind the vehicle to allow for tailgate.
2.
Remove both tailgate lock blocks.
3. Open the tailgate so that the bottom portion is about 36” away from the body.
4.
Unlatch each prop from its stored position and allow it to swing out 90 degrees, or perpendicular
to the tailgate frame.
5.
Lock the props in place by releasing the spring latch rods so they engage in the holes provided.
6. Close the tailgate as far as required so that the props engage into the receptacles attached to the
body frame.
7. Complete the Lockout/Tagout procedure as explained elsewhere in this manual.