Labrie Automizer Versa Hand Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 80

Labrie Automizer Versa Hand Скачать руководство пользователя страница 53

Controls and Indicators

47

Figure 3-17 Multi-cycle switch

Joystick Controls

Arm Joystick

The joystick is used to control the Versa Hand

TM

arm of the Automizer

TM

. It can be located either on

the console at the center of the cab or near the right-hand side door. In some units, two joysticks are
installed in the cab: one on the console, the other near the right-hand side door.

The controls on the joystick are the handle, the buttons on the top and front, and the deadman
switch.

The handle is used to control the horizontal and vertical movements of the arm’s two main
components.

The top buttons are used to control the opening and closing movement of the gripper: the right
button is used to open the gripper; the left button to close the gripper.

The buttons on the front are used to control the Auto-Dump

TM

feature (optional).

N

OTE

:

The Auto-Dump feature is optional. Therefore, the front buttons are functional only on
vehicles equipped with this feature.

The deadman switch is used as a safety device to ensure that every movement of the arm is absolutely
wanted and controlled by the operator. That is, if the operator is not pressing the deadman switch
while trying to move the arm with the joystick, no movement will occur. With such a safety feature, an
accidental movement of the joystick will not be transmitted to the arm.

Joysticks operate at 45° and 90° angles. As a result, you can perform two functions at the same time;
for example, you can move the arm and the grabber simultaneously.

«
...
51
52
53
54
55
...
»

Содержание Automizer Versa Hand

















































































Отзывы:

Нет отзывов