BTA 060, Rev 1K1
Page 16/18
6.5.1 Configuring the output function (
out 1/2
)
You can choose a hysteresis or frame function as the output function. Furthermore you
can define whether the output is normally open or normally closed.
Display
Designation
Description
Hysteresis,
normally open
If the pressure is above the switch-point the
switch is closed. At the lower range limit the
switch is open.
Hysteresis,
normally closed
If the pressure is above the switch-point the
switch is open. At the lower range limit the
switch is closed.
Frame,
normally open
Inside of the frame the switch is closed. At
the lower range limit the switch is open.
Frame,
normally closed
Inside of the frame the switch is open. At the
lower range limit the switch is closed.
Return
Return to "
out 1
" or "
out 2
"
Table 13: Parameter list for output function
Figure 15: The output functions
switch-point (SP) or
upper frame limit (FH)
reset-point (RP) or
lower frame limit (FL)
Hysteresis / normally open (Hno)
Hysteresis / normally closed (Hnc)
Frame / normally closed (Fnc)
Frame / normally open (Fno)
