![background image](http://html2.mh-extra.com/html/labom/ci4-series/ci4-series_operating-instructions-manual_3191650018.webp)
BA_078 Rev 1F6 Level transmitter PASCAL Ci4 LEVEL
Page 18/36
OK
OK
OK
3x
Figure 17: Procedure for setting a numeric value (e.g. from 1.0 to 0.9)
6.5 The Menue Tree
In the following, the display and adjustment options are described by their position in the
menue tree. An overview of the menue tree can be found on the last page of this docu-
ment.
6.5.1
Main menue
The main menue has the following entries:
Menue entry
Description
Quick setup
Selection of the most important settings
Level
Parameterisation of level measurement
Adjustment
Adjustment functions for pressure measurement and current out-
put
Display
Functions for configuring the display
Measurement/output
Configuration of the measuring rate, damping and current output
Diagnosis
Diagnostic information such as min/max values
Simulation
Simulation of current or one of the possible measurands for func-
tion check of the measurement chain
Communication
Information and settings regarding HART communication
System
Device data and function such as factory reset
Table 6: The main menue