background image

Communication Unit 

Labcom 220 
Warning Device GA-1

Quick Guide

DOC001417-ENG

Labkotec Oy

Myllyhaantie 6
FI-33960 Pirkkala 
FINLAND
Tel. int.  +358 (0)29 006 260
Fax int.  +358 (0)29 006 1260
E-mail [email protected]

SMS parameter steps and examples

Parameter setting for one or multiple user 
mobile phone numbers

Parameter setting for device or system name 

Parameter setting for current date and time 

Parameter setting for digital input

Parameter setting for cyclic status notification

Labkotec GmbH

Technologiezentrum
Lise-Meitner-Strasse 2
24941 Flensburg
GERMANY
Tel. int.  +49 (0)461 9992 410
Fax int.  +49 (0)461 4807 335
E-mail [email protected]

10/2016  DOC001417-ENG

Labkotec AB

Ekbacksvägen 28
SE-168 69 Bromma
SWEDEN
Tel. int.  +46 (0)8 130 060
Fax int.  +46 (0)8 555 36108
E-mail [email protected]

Mobile phone number with plus sign and country code

Max. 20 characters

Input status definition, default: 0

Text to enable alarm, max. 20 characters

Alarm name, max. 20 characters

Status notification, 1: daily, 7: weekly

Time: hh:mm

Alarm delay in sec., max. 34000 s

Text to disable alarm, max. 20 characters

Time: hh:mm

TEL +49_ _ _ _ _ _ _ _ _ _ _  +49_ _ _ _ _ _ _ _ _ _ _ 

NAME Grease separator 123

CLOCK 31.01.2016 15:00 

DI1 Grease alarm On Off 0 5 

TXD 7 14:00 

Labkotec Oy reserves the right to make changes 
at any time and without prior notice. Technical 
specifications may change at any time because 
of ongoing improvements done by our Depart-
ment of Research and Development. The instal-
lation must always be carried out in accordance 
with the instructions of the manufacturer.

Labcom 220

GA-1

Relay contact:

Grease alarm enabled

GA-1

DI1

1

3

2

4

4

3

5

DI2 +Us

GND

Di1 Di2

GND

+Us

L

N

1  2  3  4  5  6  7  8  9 10

N  L1

3   4    5

2              1

Labcom 220

Application example

Please take note 

This Quick Guide describes an appli-
cation example for the communication 
unit Labcom 220 and the warning 
device GA-1. It is not substituting the 
instruction manuals for Labcom 220 
and GA-1. 

Safety instructions, intended use and 
detailed information of the two devices 
are described in each of the corres-
ponding instruction manuals.

Requirements

The Labcom 220 communication unit 
as well as the GA-1 warning device 
must be installed in accordance with 
the respective instruction manual. 

The cable connection between the 
two devices matches the application 
example.

Please take note

The SMS command must use the uppercase and must end with a blank 
space. Multiple entries must be separated by a blank space. Mobile phone 
numbers must always use the plus sign followed by the country code. 
SMS text input are always confirmed with a reply SMS by the Labcom 220 
communication unit. If no con-
firmation or notification arrives, 
check the credit balance of the 
SIM card or the contract term of 
your mobile service provider.

The PIN code for the SIM card of 
the Labcom 220 communication unit 
must be disabled. This can be done 
by means of a mobile phone. Follow 
the instructions provided in the mobile 
phone’s manual to do this. 

The application example shows the 
scheme of the GA-1 warning device, 
where the relay switches upon grease 
alarm, sensor cable breakage or sen-
sor defect. The relay of the warning 
device switches back as soon as the 
sensor is no longer in the alarm state.  

Inserting the SIM card

Labcom 220

Date: TT.MM.JJJJ

6   7    8

Отзывы: