General Safety ..............................................................................................................................2
Introduction ..................................................................................................................................2
Box contents .................................................................................................................................2
Specifications ................................................................................................................................3
Operation - Panels and Functions .........................................................................................3
Typical Setup .................................................................................................................................4
Remote IR System........................................................................................................................4
General Safety
• For optimum performance and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Keep this manual for future reference.
• To prevent fire or shock hazard, do not expose any part of this device to rain or moisture.
• This product is for indoor use only
• The unit should not be exposed to direct sunlight, very high or low temperature,
moisture, vibrations or dusty environments.
• Do not place the product in enclosed bookcases or racks without proper ventilation.
• Do not use abrasives, benzene, thinner or other solvents to clean the surface of the unit.
To clean, disconnect the unit from the mains, wipe with a clean soft cloth and add a mild
detergent solution if necessary.
• Do not disassemble the splitter or power supply they contain no user serviceable parts.
Refer servicing to qualified personnel only.
• Do not overload wall outlets and extension cords as this can result in the risk of fire or
electrical shock.
• SURGE PROTECTION DEVICE RECOMMENDED: This product contains sensitive electrical
components that may be damaged by electrical spikes, surges, lightning strikes, etc.
Introduction
The Labgear range of 4k splitters are designed to split the HDMI signal from a single high
resolution source to mutiple displays without signal loss. They also have a backward IR
function allowing remote control of the source from the display location.*
• Compliant with HDMI2.0, HDCP2.2 and DVI 1.0
• Support video format up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2
and up to 4k2k@60Hz with 12bit YCBCR 4:2:0
• Support 3D frame sequential video format up to 1080p@60
• Support high resolution VESA mode video format up to QSXGA@60Hz
• Support LPCM 7.1CH, Dolby True HD and DTS-HD Master Audio
• Support smart EDID control
• Support Remote IR System for controlling a source from any connected display
Contents
2
Box Contents
1x 4 Way HDMI Splitter
1x 5V
𝌂
1A Power adaptor
1x User guide
