LM3606 PRINT & APPLY SYSTEM
USER’S MANUAL
Page 31
Made in the U.S.A.
© 2021 LabelMill
06/01/2021 Model LM3606
•
COUNTER
Used to reset the internal counter of the control (displayed on the main screen of the HLI-100).
•
PRINT TYPE
The print type command is used to activate the print repeat cycle in the supplied print engine. This feature will continue to
print the
last label
in the buffer after the buffer count has expired.
PROGRAMMABLE BLOCKS:
Reprint – Turns reprint option ON or OFF
Serial End – On or Off Not Supported
•
CYCLE TYPE
Cycle Type determines the application type and sequence in relation to the label feed.
PROGRAMMABLE BLOCKS:
No Tamp- Print and Feed Label Only
Tamp Before Feed – (standard) Tamps label first, prints label second
Tamp After Feed – Prints label first, tamps label second
Blow Before Feed – Blows on label first, prints label second
Blow After Feed - Prints label first, Blows on label second
Pre-Print Tamp – First trigger prints label, second trigger applies tamp label (requires additional external trigger)
Pre-Print Blow – First trigger prints label, second trigger blow applies label (requires additional external trigger)
Clamshell Before Feed – Clamshell applies label first, prints label second
Clamshell Before Feed – Prints label first, clamshell applies label second
Round Before – Not Supported
Round After – Not Supported
•
JOB STORAGE
Used to store frequently used settings pertaining to different labeling jobs.
PROGRAMMABLE BLOCKS:
SAVE JOB – stores settings for active job.
RESTORE JOB – Restores saved job.
•
DEFAULT SETTINGS
This setting will return the controller to the default settings.
•
I/O STATUS
Displays the status of the inputs and outputs
3-03
