LM3612 PRINT & APPLY SYSTEM
USER’S MANUAL
Page 29
Made in the U.S.A.
© 2021 LabelMill
06/01/2021 Model LM3612
PROGRAMMING
All programming is performed via the
HLI-200
keypad and display. All programmed settings are
backed in nonvolatile memory and are not lost when the unit is powered off.
Upon power up of the control, the screen will display
MODEL NUMBER & REVISION
of the HLI-200
and then the
MODEL NUMBER & REVISION
of the labeler control
.
After this, the screen will now
display the "Total" counter, "Batch" counter, and Cycle time in the center of the screen. Error
messages or warning will be displayed in the box at the bottom of the screen. The top of the screen
allows you to Start, Stop, Enable, or Disable the system, and also shows the current state of the
system.
KEY FUNCTIONS:
START:
•
Start key will initialize the application cycle.
STOP
:
•
Stop key will abort the cycle only when not
in the program menu.
: (NOT SHOWN)
•
Print key will signal the connected print
engine to dispense (1) printed label. (Print
files must be loaded into Print Buffer)
ENABLE
:
•
Enable key will “Enable” the system after it
has been disabled.
DISABLE:
•
Disable key will prevent the system from
accepting trigger inputs.
CLEAR
:
•
Clear key will clear an error status
PROGRAM:
•
Program key will enter the system editor.
3-01
