Labconco SteamScrubber 45780 Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 70

Labconco SteamScrubber 45780 Series Скачать руководство пользователя страница 12

Chapter 3: Getting Started

Product Service 1-800-522-7658

8

8

Unpacking Your Glassware Washer

Carefully unpack your Glassware Washer and inspect it for damage that may have
occurred in transit. If your Glassware Washer is damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.

The United States Interstate Commerce Commission rules require that claims be
filed with the delivery carrier within fifteen (15) days of delivery.

Do not discard the carton or packing material for your Glassware Washer until
you have checked all of the components and installed and tested the Glassware
Washer.

NOTE: Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted. If your Glassware Washer was
damaged in transit, you must file a claim directly with the freight carrier.
Labconco Corporation and its dealers are not responsible for shipping
damage.

Do not remove the washer from its shipping skid until it is ready to be placed into
its final location. Move the washer by placing a flat, low dolly under the shipping
skid.

Washer Components

Locate the model of washer you received in the following group of tables. Verify
that the components listed are present and undamaged.

Catalog #

Washer Description

4400320

SteamScrubber Undercounter – 115 V with upper & lower racks

4400321

SteamScrubber Undercounter – 230 V with upper & lower racks

4400330

SteamScrubber Undercounter – 115 V with window, upper & lower racks

4400331

SteamScrubber Undercounter – 230 V with window, upper & lower racks

4578020

SteamScrubber 33 Undercounter – 115 V with upper & lower racks

4578021

SteamScrubber 33 Undercounter – 230 V with upper & lower racks

4578030

SteamScrubber 33 Undercounter – 115 V with window, upper & lower racks

4578031

SteamScrubber 33 Undercounter – 230 V with window, upper & lower racks

Plus the Following Loose Parts:
Part #

Component Description

1879801

Leveling Feet (4)

4591100

User Manual

4462900

Screws (2)

1488800

Clamp (1)

4522500

LabSolutions Powder Detergent with MSDS – 6 ounces (175 grams)

1410700

Water Connector

1448700

Coupling & Sleeve (1)

Catalog #

Washer Description

4400420

SteamScrubber Freestanding – 115 V with upper & lower racks

4400421

SteamScrubber Freestanding – 230 V with upper & lower racks

4400430

SteamScrubber Freestanding – 115 V with window, upper & lower racks

4400431

SteamScrubber Freestanding – 230 V with window, upper & lower racks

SteamScrubber
Freestanding
Models

SteamScrubber
Undercounter
Models

«
...
10
11
12
13
14
...
»

Содержание SteamScrubber 45780 Series







































































Отзывы:

Нет отзывов