Labconco PuriCare 3820000, Руководство пользователя, Страница: 40 / 52

Chapter 7: Modifying Your Open Access Station
Product Service 1-800-522-7658 36
Installing the Handle Kit
1.
Turn the PuriCare off.
2. Remove the work surface.
3. Locate and remove the four black plastic plugs on the side of the Open Access
Station. The handle bolts will go through these holes. Remove the plastic
plugs by pressing them out from the inside.
4. Assemble the handle by pushing two bolts through the holes on either side of
the handle.
5. Thread on a lock nut on the end of each bolt. While holding the bolt head with a
½ inch wrench or socket, use another ½ inch wrench to tighten the nut. Ensure
that all bolts are tightened securely.
6. Reinstall the work surface.
Figure 7-2