23
Product Service Domestic 1-800-522-7658, International 816-333-8811
Chapter 4: Using Your CentriVap
Operating The CentriVap
Controls
Preheat:
To preheat the chamber, press the “PREHEAT” button.
The display will show:
SP: XXX
ACT:
XXX
Press the increase or decrease button until the desired
set point (SP) is displayed. The actual chamber
temperature, (ACT) is displayed to the right. When
power is being supplied to the heaters, a bar under the
actual temperature will illuminate. The chamber will
continue to preheat until either the “PREHEAT” button
is pressed again or the “RUN” button is pressed.
Select existing program:
Operating parameters can be stored in memory so
protocols can be repeated. Nine programs can be
stored. To select a program, press the set point
“SELECT” button until arrows point to the program
number indicating that this set point can be run or
altered. To change the program number, press the
increase or decrease button until the desired program
number is displayed. When the program number is
changed, all its set points change also to indicate the
last entered parameters for that program.
Store frequently run protocols in program 1, 2, or 3.
Then, by pressing “PROG 1”, “PROG 2” or “PROG 3”,
the stored program will be initiated without having to
press any other button. Pressing just the one button
starts the rotor, the heater, the timers and the vacuum
pump.
Содержание CentriVap 78110-00
Страница 43: ...41 Product Service Domestic 1 800 522 7658 International 816 333 8811 Appendix A CentriVap Components...
Страница 45: ...43 Product Service Domestic 1 800 522 7658 International 816 333 8811 Appendix A CentriVap Components...
Страница 47: ...45 Product Service Domestic 1 800 522 7658 International 816 333 8811 Appendix A CentriVap Components...
Страница 63: ...63 Product Service Domestic 1 800 522 7658 International 816 333 8811...
