PLM Series Operation Manual
47
See
DLC User Manual PLM Edition
for for further
information regarding Dante implementation.
9.12.8.1 break In Physical Line
Any PLM on a Dante network may act as the means
of inputting audio signals (analog or AES/EBU) into
the system. The audio is embedded in the Dante data
stream in that PLM, and is thus available to other
Dante-enabled devices (i.e. further PLMs). In this
way, the PLM is being used as a “break-in box”.
9.12.8.2 Probe Routing
The Dante protocol allows for the inclusion of two
“probes” from each Dante-enabled device on the
network. These are essentially items of “metadata”,
allowing device monitoring. The assignment of
internal PLM parameters to the probes is selectable
from this submenu option; the default assignments
are output voltage and current for Channel 1.
FRONT PANEL INTERFACE 9
