Laars MSTWW199, Руководство по эксплуатации

Страница: 3 / 64

Mascot ST Tankless Water Heater
Page 3
SECTION 1 Product Accessories
Items Descriptions Qty
LAARS Tankless Water Heater
1
Installation Instructions and
User’s Manual
1
Condensate Hose
1
Wall Mount Bracket
1
Bolts w/Anchors
4
Vent terminal cap 3”
2
Parts Kit 1
1.1 Introduction
This manual provides information necessary for the
installation, operation, and maintenance of the LAARS
Heating Systems Mascot ST
. All application and installation
procedures must be read and reviewed completely before
proceeding with the installation. Consult the LAARS Heating
Systems factory, or your local factory representative, with any
problems or questions regarding this equipment. Experience
has shown that most operating problems are caused by
improper installation.
All installations must be made in accordance with
1) American National Standard Z223.1/NFPA54-Latest
Edition “National Fuel Gas Code” or
2) CSA B149.1 “Natural Gas and Propane Installation Code” and
with the requirement of the local utility or other authorities having
jurisdiction. Such applicable requirements take precedence over the
general instructions contained herein.
All electrical wiring is to be done in accordance with the local
codes, or in the absence of local codes, with: 1) The National
Electrical Code ANSI/NFPA No. 70-latest Edition, or 2) CSA STD.
C22.1 “Canadian Electrical Code - Part 1”. This appliance must be
electrically grounded in accordance with these codes.
1.2 Included with the Unit