This document is the exclusive property of FTFM La Toulousaine and must on no account be copied. It may be modified at any time in accordance with product changes.
_N°7386
Installation_Totem operator (Sliding gate)
09/21
p.19
-
Press the programming button (
1
) and hold it
down for 5 seconds (one of the LEDS flashes).
-
Release the programming button (
1
).
-
Press a key of the transmitter to be deleted
(LED goes out).
-
The deletion of a key is complete.
-
Press programming button (
1
) and hold it down
after selecting the channel.
• 1
time for channel 1, LED
2.1
lights up :
Pulse mode
.
• 2
times for channel 2, LED
2.2
lights up :
Partial opening
.
Please note :
If LED
2.3
or
2.4
lights up, continue
to press until LED
2.1
or
2.2
is reached.
-
The LED flashes after 5 seconds and then lights
up after another 10 seconds.
-
Release the programming button (
1
).
-
Deleting a channel is complete.
-
Press the programming button (
1
) and hold it
down.
-
The LED flashes after 5 seconds, then lights up
after another 10 seconds and finally after 25
seconds all LEDS light up.
-
Release the programming button (
1
).
-
Memory wire is complete.
Non utilisés
Deleting a key from the transmitter
To remove all the keys from the transmitter,
repeat the steps below for each key.
Deleting a channel
Memory wipe
